AMMOcoin v1.1.1 Downloads

The Proof of Stake release: wallet, daemon and command-line tools.

v1.1.1 is published on GitHub. Every download below comes from that release.
Do not install v1.1.0. It runs the pre-fork chain that stalled at block 2,775. v1.0 is halted: keep your v1.0 wallet.dat safe and do NOT send v1.0 coins to anyone. Your balance will be airdropped to the same address. See Migration.

Release details

  • Version: 1.1.1 (tag v1.1.1)
  • Release date: October 21, 2026 (release notes)
  • Consensus: hard fork to Proof of Stake at block 2,776; blocks about every 3 minutes
  • Data folder: new, separate from v1.0: ~/.ammocoin11 (Linux), AMMOcoin11 (macOS/Windows)
  • Ports: P2P 37020, RPC 51473 (keep RPC private)
  • Pre-built for: Windows x86_64, macOS (Apple Silicon and Intel), Linux x86_64, Linux ARM64 / Raspberry Pi.

What's in v1.1.1

  • Proof of Stake: stake from your own wallet; coins stake after 600 confirmations
  • Cold staking: delegate to a staking server while your spending keys stay offline
  • Masternodes: 10,000 AMMO collateral kept in your own wallet, 15 confirmations, public IPv4
  • Issuance: unchanged by the fork; set by GetBlockValue in the code
  • Treasury: budget proposals paid in a superblock every 43,200 blocks (about 90 days at 3-minute blocks)
  • Privacy: optional Sapling shielded transactions
  • Separation: new network ID, so it never connects to v1.0 or v1.1.0 nodes

Download AMMOcoin Core v1.1.1

Always verify the checksum before you run a download.

Windows (x86_64)

v1.1.1

AMMOcoin-Qt desktop wallet, plus the daemon and command-line tools.

Installer (.exe) .zip .tar.gz

Requirements: Windows 10 or 11, 64-bit. The .zip and .tar.gz are portable (no installer). The binaries are not code-signed, so Windows SmartScreen may warn you: check the checksum, then choose "More info" > "Run anyway".

Linux server / CLI (x86_64)

v1.1.1

Headless daemon (ammocoind), ammocoin-cli and ammocoin-tx. For the desktop wallet, see Linux desktop wallet.

.deb (amd64) .tar.gz .zip

Requirements: Ubuntu 22.04+ or Debian 12+ (glibc 2.34 or newer). Ubuntu 18.04 and 20.04 cannot run v1.1.1.
.deb (server package): sudo apt install ./AMMOcoin-v1.1.1-Linux-amd64.deb installs the tools to /usr/bin and runs the node as a systemd service (ammocoind), Sapling parameters included. For a staking server, cold staker or masternode, use the one-command installer.

Linux server / CLI (ARM64 / Raspberry Pi)

v1.1.1

Daemon and command-line tools for 64-bit ARM: Raspberry Pi 4 or 5 and ARM servers.

.deb (arm64) .tar.gz .zip

Requirements: a 64-bit OS with glibc 2.34 or newer: Raspberry Pi OS (64-bit, Bookworm), Ubuntu 22.04+ or Debian 12+. 2 GB+ RAM recommended.
.deb (server package): sudo apt install ./AMMOcoin-v1.1.1-Linux-arm64.deb runs the node as a systemd service (ammocoind), Sapling parameters included.

Linux desktop wallet

v1.1.1

AMMOcoin-Qt desktop wallet for Linux, plus the command-line tools.

x86_64

AppImage (x86_64) .tar.gz (x86_64)

ARM64 (including Raspberry Pi 4/5, 64-bit OS)

AppImage (ARM64) .tar.gz (ARM64)

Requirements: Ubuntu 22.04+ or Debian 12+ (glibc 2.34 or newer).
AppImage: includes the Sapling parameters; make it executable (chmod +x) and run it.
.tar.gz: run install-desktop.sh from the unpacked folder; it fetches the Sapling parameters and adds a menu entry.
Server package installed too? If the ammocoind .deb is installed and its service is running, stop it before you start the desktop wallet (both use port 37020): sudo systemctl stop ammocoind

macOS

v1.1.1

The .dmg holds the AMMOcoin-Qt wallet app plus the command-line tools. The .tar.gz and .zip hold the command-line tools only.

Apple Silicon (M1 and newer)

.dmg (Apple Silicon) .tar.gz .zip

Intel (x86_64)

.dmg (Intel) .tar.gz .zip

Requirements: macOS 13 Ventura or newer. Signed and notarized by Apple.
The wallet app carries its own Sapling parameters. The command-line archives include fetch-params.sh to download them.

One-command server install

Linux

For a staking server, cold staker or masternode on Ubuntu 22.04+ / Debian 12+ (x86_64 or ARM64). install-node.sh verifies the download against the SHA-256 you give it, installs the daemon as a systemd service running as its own ammocoin user, fetches and checks the Sapling parameters, writes ammocoin.conf and opens port 37020.

curl -fsSLO https://raw.githubusercontent.com/everquin/AMMOcoin/v1.1.1/scripts/deployment/install-node.sh
sudo bash install-node.sh --role node \
  --tarball https://github.com/everquin/AMMOcoin/releases/download/v1.1.1/AMMOcoin-v1.1.1-Linux-x86_64.tar.gz \
  --sha256 <sha256 from the checksums file>

Roles: node (default), coldstaker, or masternode (add --mnkey <key> --ip <public IPv4>). Use the ARM64 tarball on ARM. Guides: staking and cold staking, masternodes.

Apps and tools

AMMOcoin Wallet app

v1.1.1 coming

A cross-platform wallet app built with Flutter. No build for the v1.1.1 network is published. A download link will appear here when one is.

Until then, use AMMOcoin Core v1.1.1 above. Older app builds (v1.1.0) are for the pre-fork network and cannot follow v1.1.1.

Paper Wallet Generator

offline tool

Create an AMMO address and key on paper, offline, in your browser (Web Crypto API + QR codes).

Generator

Download it and run it on an offline computer.

Block Explorer

live

Browse blocks, transactions and addresses on the v1.1.1 network. You can also check the chain from your own node with ammocoin-cli getblockcount and getblockchaininfo.

explorer.ammocoin.org

Source code

open source

Build AMMOcoin yourself on Linux, macOS or Windows (WSL), or cross-compile.

Source code Build guide

Installation and setup guides

Wallet and node setup

Install, encrypt your wallet, stake, and run a node as a Linux service.

Upgrading from v1.0 or v1.1.0

Keep your old wallet.dat safe and move to v1.1.1 without mixing data.

Security best practices

Protect your coins and private keys.

Troubleshooting

Fixes for common install, sync and masternode problems.

Verify your download

Every v1.1.1 file is listed with its SHA-256 checksum in AMMOcoin-v1.1.1-ALL-PLATFORMS-CHECKSUMS.txt. Compare your file's checksum with the one in that file before you run it. If they differ, delete the file.

  1. Linux: put the checksums file next to your download and run sha256sum -c --ignore-missing AMMOcoin-v1.1.1-ALL-PLATFORMS-CHECKSUMS.txt
  2. macOS: shasum -a 256 <downloaded-file>
  3. Windows (PowerShell): Get-FileHash <downloaded-file> -Algorithm SHA256
Checksums file v1.1.1 release page

Older releases: v1.1.0 ran the pre-fork chain that stalled at block 2,775, and the v1.0 wallets belong to the halted v1.0 chain. Neither is offered for download any more.